| Features | WL800 |
| Product type | Universal communicator |
| Control panels supported by data interface | • SECOLINK (control panels: PAS8xx, Pxx, S16xx, S32xx) MG5xxx, SP5500+2,3, SP6000+2,3, SP7000+2,3) |
| Control panels supported by analog interface | All control panels with PGM outputs / zone inputs |
| Additional services that are included in the final price of the product | The WL800 comes with 2 years of paid cloud services, allowing the user to take full advantage of the SECOLINK Pro app1. |
| Number of recipients for internet messaging using app SECOLINK PRO | 10 |
| Reporting to Central Monitoring Station (CMS) | Yes (There are additional conditions. Contact CMS company) |
| Reporting to CMS format | CID by Wi-Fi/Ethernet |
| Reporting protocols for CMS | E2 (Enigma), FIBRO (Sur-gard), CSV (Patriot), SIA |
| Compatible with SG-SYSTEM II , III IP card | Yes |
| Wireless Network Standard | 802.11b, 802.11g, 802.11n |
| Frequency | 2,4 GHz |
| Authentication methods | WPA/WPA2 PSK, PEAP, EAP-TLS |
| IP address | Static or dynamic (DHCP) |
| In-built wired zones (inputs) on board | 2 |
| On-Board (open collector type) PGM | 1 |
| Maximum current into OUT | -0,05 A |
| Power supply (DC) | 9 - 14 V |
| Average current consumption | 60 mA |
| Maximum current consumption | 200 mA |
| Plastic casing | Yes |
| Overall dimensions W x D x H in mm | 78 x 50 x 19 |
| Environmental compliance | ROHS |
| Operating temperature | From -10oC to +50oC |
| Production status | In production |
| Interface with PC | Wi-Fi (wireless access point), USB (USB to TTL adapter is required) |
| Firmware update | • Using USB to TTL adapter and software Firmware upgrade tool RS |
| Manuals, software, latest firmware version |  Download |
1 - at the end of the paid period, the user will be offered to renew the license. The license is renewed upon purchase of a WLCT voucher. Without renewing the license, the WL800 will only be usable to report to the CMS receiver. Before buying the WL800 it is necessary to check whether the price of WLCT voucher is acceptable. The voucher can be purchased at shop.secolink.eu | |
2 - the SERIAL port must be unlocked before using the panel with the communicator (firmware version v.1.16 or higher). The SERIAL can be unlocked for an additional fee. For more information, contact your local distributor or send an email to our support team: support@secolink.eu | |
3 - upgrade the control panel firmware to the latest version (v1.21.003 or later). The control panel with the stock version does not send all events to SERIAL port. | |
WL800
The main purpose of the Wi-Fi communicator WL800 is to send events from compatible control panels to the end user app SECOLINK PRO or to Central Monitoring Station (further CMS). WL800 is primary designed for use with DSC, PARADOX, SECOLINK control panels, although it can be used with any other control panel if the control panel has a key-switch zone and PGM outputs.
Buy it now on shop.secolink.eu